Paver Process

Excavation, Removal of Soil or Debris in the Area of Your New Paver Project

Now that the heights are set the crew can start to excavate. From the height of our stringline we dig down 7-8 inches. All the soil we excavate will be carted away. With that complete and all the soil removed, the crew will check one last time to confirm their heights and then start compacting the ground. This will help prevent settling

Patio installers near me, patio contractors

Installing Subbase

RCA. Recycled concrete aggregate, is what we use as a subbase for all residential. Walkways. Poured concrete is only necessary around new pools and driveways. The RCA is installed in “lifts” meaning we fill the area with 2-3” of base, compact it and then repeat until we reach the top of our forms. Once we have achieved a satisfied amount of subbase it is time to add fine sand. The sand will get spread over our RCA subbase, tamped and then screeded out to a smooth finish. Since the pavers are manufactured with a 1/16th of an inch error from the molds, the sand will allow us to get the top of the pavers to a leveled surface. 

Patio installers near me, patio contractors

Setting Up to Install Pavers

Once the sand is ready we can set up our square lines. When you lay pavers, the joints in between each paver create bond lines, when setting up the patio we want to ensure it is “square” with your home or any other designated and stationary structure in that area. This is proper construction etiquette and most visually appealing to the eye. Our team is trained to lay pavers first and borders after. Patio installers near me, patio contractors

Borders

The border is where you will get a chance to add a pop of color to your project. The possibilities are endless, ranging from the same color border as your patio, an accent color or even a double border. Once all pavers are laid the patio is in its final phase of completion. Patio installers near me 

Final Stages to Paver Construction

What we do next is add a concrete edge to the perimeter of the patio that is exposed. This concrete edge is a restraint and keeps the pavers from shifting out of place. The concrete is set about 1 inch below the top of the paver and then gets covered by topsoil.

To fill in all the joints between the pavers we use polymeric sand. This process is where we sweep the sand into the joints and after proper installation and adding water the sand will set to a hard finish. Ultimately locking out weeds and helping keep the pavers together.Patio installer, Paver Patio installer.

Paver Sealants

You may say to yourself you love the way the colors look when the patio is wet. There are sealers that can leave the pavers with that look. However, to seal your patio you will need to wait at least 1 year to seal it. The reason for the wait is to allow the efflorescence to come out of the pavers. You can read more about this in a cambridge catalog. Patio installers near me, patio contractors, Paver Patio installer, Patio installer.